混炼工艺对防老剂RD残余量及胶料性能的影响

研究混炼工艺对防老剂RD残余量及胶料性能的影响。结果表明：在高温处理过程中，防老剂RD发生分解反应，且随着热处理温度的升高，其质量损失增大；防老剂RD在高温（155 ℃）混炼阶段加入比在低温（110 ℃）混炼阶段加入质量损耗增大20%；与在高温混炼阶段加入相比，防老剂RD在低温混炼阶段加入，胶料在老化前的物理性能相当，但是在热老化后的物理性能、耐磨性能和抗切割性能等均得到改善。     

Effect of UV-C irradiation on inactivation of Aspergillus flavus and Aspergillus parasiticus and quality parameters of roasted coffee bean (Coffea arabica L.)

ABSTRACT

This study investigated the antifungal effect of ultraviolet-C (UV-C) against Aspergillus flavus and Aspergillus parasiticus on roasted coffee beans. Also, any changes in the quality of the roasted coffee beans were measured after UV-C irradiation. As UV-C irradiation time increased (0–2 h), the number of surviving A. flavus and A. parasiticus spores significantly (P < .05) decreased. The reduction values of A. flavus in round part, crack part, and whole roasted coffee beans were 2.16, 0.71, and 1.58 log₁₀ CFU g^?1, respectively, and the reduction values of A. parasiticus in round part, crack part, and whole roasted coffee beans were 1.03, 0.37, and 0.72 log₁₀ CFU g^?1, respectively, after 2 h of UV-C irradiation. Field emission scanning electron microscopy showed that the morphology of A. flavus and A. parasiticus spores included expanded wrinkles that were deformed by UV-C irradiation. The Hunter colours were significantly reduced (P < .05). There was no significant change (P > .05) in moisture content, but the pH was significantly decreased (P < .05). Most of the sensory parameters did not change, but there was a significant difference (P < .05) in flavour. Based on this study, 2 h of UV-C irradiation was effective in reducing 90% of A. flavus, but it was not effective against A. parasiticus present on roasted coffee beans. Also, Hunter colour, pH, and sensory parameters (flavour) were changed by UV-C irradiation.     

基于InSAR技术和SA-SVR算法的矿区沉降预测模型

为了解决矿区沉降预测模型精度低、预测模型与实际开采情形不符的问题，提出了一种基于合成孔径雷达干涉测量（Synthetic Aperture Radar Interferometry，InSAR）技术、支持向量回归算法 （Support Vector Regression，SVR）以及模拟退火算法（Simulated Annealing，SA）相结合的新型矿区沉降预测模型。首先，以InSAR技术获取矿区沉降监测数据，对数据进行处理得到测试点的累计沉降量，并将 其与GPS实际测量结果进行比较，发现二者吻合性较好。然后，进行矿区沉降预测模型构建，通过SVR算法得到静态沉降预计模型，再利用SA算法得到模型中的参数最优取值。为了使预测数据符合矿区开采实际情况， 引入嵌入维数公式，得到矿区沉降预测动态模型及精度评价指标。最后，将构建的沉降动态模型应用于陕西省大柳塔矿区，得到预测值和实际监测值之间绝对误差的最大值为9 mm，相对误差的最大值为3%；模型评价 指标通过计算得到试验区平均绝对误差的最大值为2.5%，最小的相关性指数为0.8，表明该模型预测精度较高。     

三维地应力水平对矩形巷道稳定性分析

地应力是影响巷道稳定性的重要因素之一。文章结合王庄煤矿+540采区实际工程地质条件,基于矩形巷道应力现场测试数据,对矩形巷道周围的应力变化进行了分析。并基于FLAC 3D和DDA数值模拟软件,分析了矩形巷道尺寸对围岩应力的影响,以及三维地应力水平对矩形巷道的稳定性。结果表明,在一定范围内,地应力侧压比λ与巷道顶板位移成正比,而超出这一范围,顶板位移随着λ值的增大反而减少。     

HACCP在浓香菜籽油生产中的应用

为了保障浓香菜籽油的产品质量安全,采用HACCP体系对浓香菜籽油生产全过程进行生物、物理、化学的危害分析,确定关键控制点,制定预防措施,并对生产环节进行有效监控,制定纠偏措施,做好记录管理,为浓香菜籽油的安全生产提供借鉴。     

Zeolite imidazolate framework (ZIF)-based mixed matrix membranes for CO2 separation: A review

Mixed matrix membranes (MMMs), which combine the good separation performance of inorganic materials with the low cost of polymers, have emerged as a research hotspot for gas separation membranes. Zeolite imidazolate frameworks (ZIFs) are widely used as fillers to prepare MMMs owing to their advantageous characteristics, such as adjustable pore channels, unsaturated sites, and easy functionalization. For MMMs, three directions can be employed as criteria for improvement compared with pristine polymeric membranes. In this article, the progress of ZIF-based MMMs is reviewed from the aspects of sole-ZIF-based MMMs and modified ZIF-based MMMs. Both strategies improve the separation performance through different improvement directions and mechanisms. Our analysis shows that the synergistic effect of the modified filler can change the structure of the membranes, such as by improving the filler–polymer interface voids, which provides a foundation to overcome the trade-off effect to a certain extent. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48968.     

石墨烯负载纳米二硫化钴的制备及其在锂离子电池方面的应用研究

采用二次水热法将纳米二硫化钴负载于石墨烯上,并通过结构表征和电化学性能测试,探讨了纳米二硫化钴/石墨烯材料作为锂离子电池负极的性能。电容量测试结果表明：在电流密度为100 mA/g条件下,二硫化钴/石墨烯复合材料的首周充放电容量分别为1 610 mA·h/g和774 mA·h/g,测算出的库伦效率为48.1%;循环性能测试结果表明：经过50次循环测算后的复合材料的放电比容量为302 mA·h/g,容量保持率为33.4%;倍率性能测试结果表明：当电流密度回复到100 mA/g时,复合材料的比容量恢复至550 mA·h/g。实验制备的纳米二硫化钴/石墨烯复合材料在锂电池负极的应用上表现出了优异的循环性能和倍率性能。